Yearly Archive2017

New Roof vs. Re-Roof: Whats the Difference

Is roofing system replacement a much better alternative than maintaining it when the roofing system’s leak-proof stability– its main function– stops working? To puts it simply, at exactly what point do roof leakages become intolerable, and it’s time to change the roofing system?

Consider how roof leaks can affect the bottom line:

Interior damage: To ceiling tiles, carpet, computers, gym floors that might cost $500,000 to change.

Production downtime: Shutting a line down for a day could cost thousands of dollars in lost productivity.

Lost company: Roof leakages at a four-star hotel can make the most costly rooms unavailable for guests.

Postponing roofing system replacement can include expenses to a new roofing system project once the choice to replace it is made. Inefficient and irregular patching and other upkeep can permit water to penetrate the membrane and cause irreparable damage to roofing system components, consisting of insulation and the roofing deck itself. Here are some possible added-cost considerations:

Detach– add $1-2 per square foot.

Roofing deck replacement– add $2.50-6.00.

Asbestos elimination (possible for some older centers)– include 10% or more.

The roof contributes– typically– 5% to the building expense of a building, but is one of the most prosecuted element of an industrial building.

Building owners/managers should use their experience to develop a forecasted average life span of roofings. A number of elements will affect a roofing system’s life span: style quality, setup stability, products, upkeep, roof usage, and weather condition.

Here’s an example: If you handle a million square feet of roofing that has actually a projected life span of 20-30 years, you may think about budgeting to replace 1/20 or 5% (50,000 square feet) per year. If the average installation cost is $5 per square foot, want to budget $250,000 each year.

So when you are choosing between maintaining or changing, take a look at your yearly maintenance expenses and if they are exceeding exactly what your annual new roofing budget is, it may be time to change.

The Importance of Proper Attic Ventilation

One the most popular topics in the construction market and in other places is the negative impact that direct exposure to mold and mildew can have on human health. It has recently been reported that the mold count inside a structure can be as much as two to five times higher than outdoors. The key to safeguarding the health of citizens is to decrease the event of mold and mildew from the start. One important prevention approach lies squarely with the roofer: the correct installation of suitable attic ventilation. click here for an additional resource on how proper attic ventilation can be beneficial for you. 

 

Sick Building Syndrome

There have been reports of cases in which direct exposure to mold and mildew has led to violent bronchial attacks, persistent sinus infections, main nerve system issues as well as memory loss.

 

According to cec-consultants. com, the Web website of an industrial engineering consulting company, biological contaminants likewise have been linked to Sick Building Syndrome (SBS). Building occupants in a “sick structure” may develop health conditions that seem linked to time invested in the structure. Research shows that signs disappear when the person leaves the building. Although no specific cause of signs has been recognized, mold and mildew have actually been named as one possible factor.

 

The difficulty for professionals is that buildings generally possess all elements essential for mold growth: mold spores, an adequate nutrient base, a temperature of 40 to 100 degrees F and the presence of wetness.

 

When property owners report mold damage to their insurer, the company investigates the cause to figure out if the damage is covered by the holder’s policy. If the cause of mold is determined to be flawed craftsmanship or products, then this cause in fact indicate the contractor, who is now forced to safeguard the claim– often without insurance coverage. Recently, some insurer have stopped covering mold-related damage in a number of states and contractors deal with serious liabilities.

 

Attic Ventilation is Key

An efficient attic ventilation system can prevent wetness and control humidity, thus reducing mold and mildew growth. Insufficient ventilation is the reason for about 50 percent of indoor air pollution and may likewise trigger shingles to weaken twice as fast. Setting up shingles with improper ventilation might result in voiding the producer’s service warranties.

 

Though today’s houses are sealed better from weather intrusion, moisture will still go into the house no matter how tightly sealed. A common family can create 2 to 4 gallons of moisture per day through routine activities such as cooking, bathing and laundry. Other day-to-day wetness triggers in the house can consist of flooding, leaking pipes, moist basements, and/or leaking roofing systems.

 

However moisture can likewise be present in structures in its gaseous state, typically referred to as humidity. At a 70-percent humidity level, the growth of fungi is fast. Regrettably, relative humidity often exceeds 70 percent inside your home even when attic ventilation requirements are satisfied. This issue is prevalent in humid climates where the outdoor relative humidity worth commonly exceeds 70 percent. By managing the indoor relative humidity in between 30 and HALF, biological development can be decreased.

 

Exactly what to Do

There are two types of ventilation: dynamic and fixed. Power, or dynamic, ventilation is achieved in two methods. In houses without cooling, the temperature level can be controlled to some extent by the use of attic fans. These fans are normally ceiling mounted in a main hallway so that outdoors air is pulled through open windows and exhausted through the attic. It is essential to calculate the required quantity and position of vents to effectively ventilate the attic.

 

Bear in mind, nevertheless, that power ventilation methods can contribute to the energy use of the home. And inning accordance with askthebuilder.com, “It turns out that roof and sidewall-mounted attic fans can really suck air conditioned air from your house into your attic area.”

Fixed ventilation is using non-powered ventilation items that deal with the natural flow of warm air and wind movement around the home. This approach benefits from two principles. First, as air is heated it becomes less thick and increases. Second, wind movement over and around a house produces locations of high and low pressure. If a space has high air outlets (exhaust) in conjunction with low inlets (intake), ventilation happens as the air within the space is heated up.

 

Continuous ridge ventilation integrated with soffit vents is the most common type of fixed ventilation. It provides for a total movement of air throughout the attic area. Other types of fixed systems include gable vents installed at the attic wall, and turbine vents and pot vents installed near the peak of the roofing system that work by drawing air from the attic area.

 

Research study has actually discovered that a system consisting of constant ridge vents combined with soffit vents supplies thorough ventilation of the attic, consisting of air areas that frequently hold stagnant air when other types of ventilation are used. Continuous ridge vents integrated with soffit ventilation enable outside air to stream into the whole attic and displace super-heated and wet air. Air is always able to leave the attic and exhaust impurities from the house. It is important that all types of attic ventilation be designed and set up appropriately to prevent biological development, especially mold and mildew.

The Affects Heavy Rainfall Has On Roofing Systems

Unforeseeable and unusual weather has actually become something that facility managers, building designers and much of the public must manage. California is already on track to log its rainiest year on record in spite of a historical dry spell that is still technically in effect. The state has actually set a new record high over the course of a rain-year, and is on track to exceed set inning accordance with the fiscal year, too.

 

The signs of this significant accomplishment can be seen throughout California. The LA Times reported that from the Anza Borrego desert near the Mexican border, to the northern coastline, the land and the infrastructure has actually been destructively shaped by heavy rain. Officials said even in dry areas, plants were “exploding into flower” as early as December, while highways have actually been rendered unusable due to flooding.

 

Rainwater also has actually put in a powerful result on business structures and the roof that should bear the bulk of this natural force. Patterns obvious in the most recent environment research suggest an extra layer of complexity, however: According to the EPA and the conclusions of the majority of environment scientists, weather patterns are ending up being less foreseeable in much of the world. That implies many of the models established to predict rainfall over the last century may not be entirely helpful in forecasting what will happen in the future.

 

That’s why cities and services throughout the United States and elsewhere have made it a top priority to create structures with extreme weather condition in mind. Thankfully, this has gotten rather simpler with the advancement of technology utilized to design, develop and keep structures today. More than ever, buildings are now developed with resiliency as a leading priority, as discussed in a post from Curbed Magazine.

 

Business and municipal buildings throughout the U.S. significantly adhere to requirements that stress very little ecological effect while withstanding the worst Mother Nature needs to use. Regarding roofing, that has implied a higher push towards utilizing materials that launch less damaging chemicals into the air and water, however are still durable adequate to stay useful for years of heavy usage. More businesses and companies also work harder to keep roofing through regular assessments and maintenance, which reduces waste while increasing long-lasting profit.

 

In lots of ways, the roofing systems atop the numerous industrial structures in California are the very first line of defense against heavy rainfall. Modern roofing is designed to withstand the tremendous force of rain while permitting it to drain safely far from the structure. Newer roofs made with SBS customized bitumen also confer additional benefits through their better heat-absorbing homes. This leads to less energy use and a decrease in contamination.

 

Roof may appear dull to some, but it serves an important purpose in handling the record-breaking weather events seen in California and elsewhere.

 

To learn more on the best ways to make sure your roof is in stable condition and able to handle the affects rainfall bring, visit www.giuffrecontracting.com.

6 Awesome Tips on Dealing With Home Storm Damage

Even if a storm does not cause torrential rain or hail, wind alone can cause enough damage to your property to require repair work. However, if you are a property owner in a location affected by a serious storm, you know just how expensive and bothersome damage can be to your building and your everyday business operations. The expense and hassle to have your roof replaced due to harm takes this inconvenience to another level with a possible closing of business, damaged possessions or loss of occupants. Property owners and insurer in these parts of the country understand that they can not prevent Mother Nature.

Here are some suggestions to help get your home back on track post-storm and conserve you and your insurance provider some cash while doing so.

1: After a storm passes, it’s time to examine the situation. Make sure to look for roof damage from any and all sources, wind, hail, rain, flying particles, and so on.

Try to find shingles or roofing membranes that were torn away or any noticeable punctures, cracks, etc. to your particular kind of roof. Search for missing or displaced metal pieces to roofing system mounted devices.

Check the interior areas of your house for any signs of leakages or water damage that may not be visible from outdoors your home.

Most importantly, remain safe when doing your post-storm evaluation– avoid going on the roofing system to look for the damage yourself if possible and instead contact an expert.

2: Find all relevant insurance plan and have them on hand. This might consist of a house owners’ policy, a flood policy, a hurricane policy and even an automobile policy for any damage your automobiles may have incurred.

3: Document all harmed residential or commercial property. It’s crucial that you take pictures or videos prior to any repairs take place. Insurer might ask you for visual documentation of damages when submitting your claim.

4: Contact your insurance provider or agent ASAP to report damages. Insurance plan normally require timely reporting of claims, so it is important not to let any damages wait around.

5: Cover any seriously damaged areas to safeguard them from the elements and to prevent any further deterioration. It might be needed that your home needs you to perform short-term fixes or repairs, if this holds true keep all receipts, your insurance company may reimburse your expenditures.

Likewise, get rid of any damaged products that could potentially spread mold or trigger additional damage to the interior of your property, record them, however do not deal with till your insurance coverage agent has a chance to study.

6: Locate the right roofing professional and materials. When researching items for insurance claim remediation work, look for the very best quality and low upkeep materials that can restore your home to new condition.


If you need emergency help or repair, see 800 New Look. They are the industry leaders in storm damage home repair.

roof-plate-264742_150.jpg

10 Common Reasons Why Roofs Leak

Roofing leaks can be damaging to a home’s structural stability due to the many issues that it causes if left untreated. Even something seemingly easy as determining a leakage’s location can be a problem when a lot of specific shingle or tile pieces remain in the way. To counter this, we’ve collected the 10 most common causes of roofing leakages.

 

1. Roofing Age

While some roofing coverings provide different degrees of durability and resistance to the components, there’s no chance around it, any material will lose its sturdiness gradually no matter the quality took into making it. Thermal buckling, moisture ‘swelling’, mold development, termite damage, and years of idly positioned dead loads will all reduce the product’s life.

 

2. Roofing Pitch

If the pitch of your roofing system is too low, that means your private shingles can be flapped up and down due to damaging hail and rain storms. Still more, they can be raised by high winds, allowing rain to go through and settle. That’s not to say that low-pitched roofing systems are bad however it relates to your area’s environment and your choice of weatherproofing materials. Having a totally flat roofing for instance– a popular choice with contemporary property building design and architecture– can be covered completely with a thermoset or thermoplastic membrane that acts as a permanent barrier between the weather and the roofing’s real surface.

 

3. Roofing system Venting

Water can very quickly seep through concrete if a leakage exists. So, it’s crucial to stop it while you can, and ensuring your roof vents are completely sealed is one of those methods. Also, inspect to see if the gaskets tapered to the vent pipelines are leaving space for air, if they are, taper them and seal them correctly to leave no room for air or water penetration.

 

4. Storm & Yard Debris

Leaving the roofing uncleaned from fallen dry leaves, tree branches, toys, or storm flung objects can block the water’s course and begin to seep in through the cracks like a sponge. Clean your roofing system one or two times a year on bright days even when debris doesn’t collect. It’s better to be safe than sorry.

 

5. Removed Flashing

Flashing is connected to a roofing’s key areas using caulk, which will dry and peel after years and years of being exposed to the components. If your house has a dormer, skylight, or chimney, the flashing will have the tendency to detach from them after years of use. Check to see if mold is forming on the flashing’s seal since that accelerate its breaking down in time..

 

6. Missing or Broken Shingles.

Shingles don’t hold up well in low-pitched roofing system situations and high winds. After being evaluated for some time, they will either crack, peel, or fly off, leaving a huge open space for water to gather and sink inside the structure. If you’re not paying attention, you should know that your contractor constantly includes an extra 10 percent of shingle when installing your roofing in case a mistake is done mid-project. For all intents and purposes, you need to have some stored in the garage or storage shed ready to be utilized for such celebrations.

 

7. Ridge Cap.

Where ridge caps’ sole function is to complete the joints in between one section or slope of shingle to the next, they can nevertheless pull the water back in through the cracks. Ever discover how water seems to go in a counterproductive instructions, even opposite to gravity? This takes place when fixed electrical power pulls the droplet or stream in using a net positive charge.

 

8. Seamless gutter Backup.

If the run-off is not flowing as it ought to between the seamless gutters shifts, either those joints are incorrectly connected, gutter needs a reinstallation with an extra tilt, or there’s debris blocking it from passing through.

 

9. Ice Dams.

In any case, removing ice gathered in the winter is vital for your roofing’s stability. Roofing systems have differing capacities of managing environmental or live loads like snow build-up, so make sure your roofing contractor took that into consideration.

By a mix of a cold climate and the ice not having sufficient time to melt totally, the ice which does melt can wind up pooling within an icy enclosure that requires you or a roofing cleaner to obtain up there and remove all of it.

 

10. Inadequate Attic Ventilation

Water is a funny compound due to the fact that it can take lots of forms and demand different techniques to ward off from your roof. A poorly ventilated attic and a fluctuating outdoor climate can result in air moisture establishing water capillaries within the ceiling. And is most likely to grow larger with time under the same scenarios every year because there’s no air preventing it from settling in one spot for too long. Just setting up a fan in your attic ought to resolve this issue.


Click here for more help on stopping leaky roofs. 

roof-plate-264742_150.jpg

Why Would I Think about Setting up Roofing Shingles in Cold Weather?

The most essential thing to bear in mind on the occasion that you have to install roofing shingles in winter is your personal safety. Traversing a sloping roofing in icy conditions is near self-destructive and must be prevented at all expenses. There is a reason that you cannot get a roofing contractor to come out and fix your roof in these conditions and it isn’t really since it’s too cold to work. Snow is no much better and even morning dew can create a very slippery surface area that is potentially deadly to anybody aiming to stroll on the roof. However, if you do need to replace shingles, attempt to remain on the ladder and make sure to manage the shingles with as much care as possible so that you don’t break them. You will have to manually seal the tabs of the shingles down yourself, since the warmth of the sun generally activates the adhesive strips, but this clearly will not be possible in winter.

You can damage material if installing roofing shingles in cold weather.

Sadly, your roof won’t normally select warm and clear days to break, undoubtedly it is far more common for your roofing to establish leaks and problems when the rain is beating down and the wind is blowing a windstorm. Even if the roof does get harmed on a calm day, it is quite unlikely that you will notice until the weather changes. At least without regular maintenance it will be. If you discover it absolutely necessary when installing roofing shingles in cold weather, there are particular things you have to be aware of, although it is always better to repair your roofing system on a calm day; it might not appear essential at the time however it is more secure for you and your roofing.

Eliminating ice or snow from the roof can trigger serious and permanent damage to the roof. Scarping away at anything on your roof can quickly result in you getting rid of the protective surface area on the shingles, and this surface is the very best defense you can get against the components. It prevents damage to the material itself and guarantees that any water will run smoothly off your roofing surface without collecting. Removing it indicates your roofing system is more susceptible to leak. Also, the tiniest knock to a freezing cold shingle is likely to break it extremely quickly.

Installing roofing shingles in winter is dangerous.

Increasing traffic on your roof in cold weather, especially when there is ice or snow is potentially harmful certainly. Any traffic on your roofing system must be prevented wherever possible because a slippery roofing is most likely to lead to a very serious fall. If you do have to go on the roof to carry out repair works you need to constantly guarantee that the roofing itself, ladders and any equipment you will be utilizing is dry and safely secured.

Click For More Roofing Info

roof-plate-264745_150.jpg

Roofing Equipment And Tools

Roofing tools are essential elements in roofing matters. They supply the ease and perhaps the only method to proceed to your roofing activity. Familiarizing with each tool name and uses might not be a so tough task, however searching for the tools and the best ways to get them is. The tools that you wish to acquire need not be expensive, however it ought to be durable.

Another business that provides durable roofing tools is Bon Tools. They have roofing professionals detach spade and shingle eater. They likewise have breeze lock punches, crimper and side swiper for siding jobs. Their tools are made from high carbon steel tempered with an accurate specification. You can purchase online through www.bontool.com. Shopping online might save more time and energy, however nothing actually compares with seeing the tools and attempting them yourself. Because case, the possibility of bad order is lower.

A freshly invented tool that helps carpenters in setting up roof is Thor Roofing Layout Tape. It has changed the method installing roof ought to be. It has actually accelerated up roofing setup hence, mistakes is lessened to the very least which means you can conserve more cash. The tool is extremely easy to deal with due to the fact that it has an easy-to-follow guide especially for beginners. Thor roofing layout tape is ensured computer-accurate, glare-free, and weather-resistant.

Roofing tools are not simply priced commodities they are investment too. Buying your very own entails financial factor to consider. So, prior to going the rounds of buying a new one check in your tool cabinet might simply do little wonder for you. Due to the fact that opportunities are you might currently have the tolls that you needed.

Roofing Tools & Equipment Co., Inc., a member of the National Roofing Contractors Association, is a one-stop shop that has a complete line of roofing tools and equipment and a choose range of trusted trademark name in the market like Malco and Estwing. The shop also offers a vast array of roofing products and accessories so going to another shop searching for tools and roofing products is a waste of time.

If you actually desire your roofing be done perfectly all right, then it’s a need to that you go and find that tool. John Stortz and Sons, Inc. has an exceptional stock of roofing tools. It focuses on producing hand tools that assure efficiency. The following: Roofers Sheet Metal Tongs and Seamers, Slate Hammers, Slate Rippers, Slate Cutters, Molding Paint Scrapers, Brick Hammers, Brick Cutters, Scribes, Soldering Irons, Tile Cutters, Roofers Adze, Roofers Axe, Tinners Hammers, Jointers, Pointing Slickers, Brick Chisels, Masonry Chisels, Boatswains Tools, Wood Caulking Irons, Riggers Tools, Scaling Hammers, Caulking Mallets, Bale Hooks, Gaffs, Draw Knives, are a few of the tools that they concentrated on.

Copper Is the Solution for Challenging Residential Roof Restoration

Copper Is the Solution for Challenging Residential Roof Restoration

This home in Alexandria, Va., was retrofitted with a copper double-lock standing seam roof system

This home in Alexandria, Va., was retrofitted with a copper double-lock standing seam roof system installed by Wagner Roofing. The 16-ounce copper roof panels were 17 inches wide. Photos: Landmarks Photography—Jay Stearns

“We like the tough jobs,” says Dean Jagusch, president and owner of Wagner Roofing Company. “We like the intricate jobs.”

Headquartered in Hyattsville, Md., Wagner Roofing has served the Washington area market for more than a century. “We specialize in historic restoration and innovative architectural roofing and sheet metal,” Jagusch notes. “We’re full service. We do slate, copper, tile, and have a low-slope commercial division as well. But our trophy stuff tends to be of the steep-slope variety.”

A recent residential restoration project in Alexandria, Va., certainly qualifies as “trophy stuff,” taking home a North American Copper in Architecture Award from the Copper Development Association (CDA) in the “Restoration: Roof and Wall” category.

It’s easy to see why. The origami-inspired design features multiple roof angles, but the daring design was problematic. Even though the home was relatively new, the owners were plagued by leaks. Along with Restoration Engineering Inc. of Fairfax, Va., Wagner Roofing was called in to consult on the project, determine the source of the leaks, and come up with a solution.

The original galvalume standing seam roof channeled the water into a large, stainless steel internal gutter with roof drains. Jagusch found that the leaks were occurring at two types of critical points. First, there were leaks where the internal roof drains met the central gutter. The other problem spots were along the pitch transitions.

Jagusch felt that installing a conventional-style painted galvalume roofing system in those spots was almost impossible. “We felt that was since it was an area that was failing, we wanted a metal we could work with when we met a transition and turn the panels vertical where we needed to without having to break them and rely on rivets and caulk,” he says.

Custom five-sided downspouts were fabricated

Custom five-sided downspouts were fabricated, but large windows at the back of the home offered few options for support. The downspouts were attached up under the framing system. Photos: Landmarks Photography—Jay Stearns

Copper was the answer. “The detailing was pretty tough to do, so we recommended changing it to copper so we could work with it, be able to solder and have a more seamless roofing assembly,” Jagusch recalls.

Another key to the project was redesigning how the roof drained. “We decided to push all the water to the exterior,” he says. “We collaborated with Restoration Engineering and we fleshed out the original redesign.”

The team decided that installing a copper roof system with a new drainage plan would be the best way to eliminate the leaks and keep the inspiring look the homeowners desired.

“We wanted to eliminate the drains and push all the water to the exterior, so that’s why we went for the re-slope of the big central gutter,” Jagusch says. “Also, at the transitions, we wanted to make sure we were 100 percent watertight, so we used a combination of turning up panels and soldered cleats to get everything into place.”

Solving the Puzzle

With its intersecting planes, the roof made laying out the panels an intricate puzzle. “You also had large expanses of roofing that changed pitch throughout,” Jagusch explains. “Panels had to be laid correctly because not only does the roof slope up, but it also slopes sideways. The layout of the panels was critical from the get-go. We all looked at it and agreed that we would follow parallel to the actual trusses, which we felt was the best solution.”

The old roof system was removed and stripped down to the 3/4–inch plywood deck. “We covered the entire roof deck with Grace Ultra,” said Jagusch. “We then used a slip sheet and installed 1-inch-high, double lock, 17-inch-wide, 16-ounce copper standing seam panels.”

Photos: Landmarks Photography—Jay Stearns

Photos: Landmarks Photography—Jay Stearns

Panels were roll formed at the Wagner metal shop out of 20-inch-wide coils using an ESE roll former and trailered to the jobsite. Approximately 5,400 square feet of copper panels were installed on the project. The double-lock seams were mechanically seamed. Twenty-ounce copper flat-seamed panels were used in the large valleys.

The safety plan included full scaffolding during every phase of the project. “We have our own safety scaffolding system,” Jagusch says. “Our guys demand it on our jobs, and we demand it of them to come home safely every day. We are very proud of our safety record. It’s front of mind for us.”

In addition to the roof, all of the metal cladding was replaced on the southeast feature wall. The top of the wall was reconfigured to accommodate the new sloped valley. Where the wall met the roof, a band was fabricated to match the top part of the fascia. Other details included copper cladding for the chimney.

Drainage was redirected to the perimeter, where custom-fabricated gutters were installed. “On the west side, the roof was originally designed to dump off straight onto a rock feature on the ground, but we fashioned a custom copper box gutter about 35 or 40 feet long,” Jagusch states.

At the either end of the large internal gutter and at the end of a large valley, shop-fabricated copper conductor heads were installed. Custom five-sided downspouts were fabricated, but installing them posed another challenge, as large window areas offered few options for support. The downspouts had to be snugged up under the framing system.

“Everything had to work with the other building components,” Jagusch explains. “One of the tougher things on this project was being able to have the function and the form both top of mind, in that order. The key was to make the functional stuff look good.”

Showpiece Project

The project was completed about a year ago, and the copper has begun to change in color. “The copper now has a gorgeous bronze, kind of purplish hue to it,” notes Jagusch. “I think it will eventually develop a green patina, but with the way the environment is these days, I think it will take 15 years or so before it gets to that point. That’s the cool thing about copper—it’s a natural, breathing material that is constantly changing, constantly evolving.”

Copper cladding was installed on a feature wall

Copper cladding was installed on a feature wall, which also featured changes in slope. The top of the wall was reconfigured and a band was added to match the top part of the fascia. Photos: Landmarks Photography—Jay Stearns

Wagner Roofing has a maintenance agreement in place on the home, so Jagusch has stayed in touch with the owners and kept tabs on the project, which is performing well. “I’ve got just one hell of a team here,” he says. “It wasn’t just one estimator that went out and brought this thing in. In our business, estimating and roofing is a team sport. We kicked this thing around a lot with all divisions of the company, from estimating to operations to the actual installers before we finally settled on a number for this thing.”

“We work on some pretty spectacular places, and of course this is one of them,” he concludes. “We like a challenge, and this is the stuff that my team really loves to get their teeth into.”

Published at Wed, 04 Oct 2017 07:00:46 +0000

K-NRG Seal™ VP

K-NRG Seal™ VP

KARNAK, an industry-leading manufacturer of reflective coatings, sealants and cements, recently announced the launch of K-NRG Seal VP, a high-performance vapor-permeable air barrier for above-grade wall application.   

K-NRG Seal VP expands KARNAK offerings, which include roofing, damp-proofing and waterproofing products; fabrics and repair tapes; caulks, sealant and flooring products; and elastomeric products.  

Published at Wed, 04 Oct 2017 13:00:00 +0000

MRCA to Release SHARP New Employee Orientation Video at 2017 Trade Show

MRCA to Release SHARP New Employee Orientation Video at 2017 Trade Show

There will be a show-only special price for this new SHARP video for anyone attending the free trade show October 17 and 18.

MRCA is releasing a new edition of the SHARP new employee orientation video. The video is a helpful tool for training new members of your crew.

See a preview of the video.

Contractors receive a free trade show pass. Register online today.

Published at Wed, 04 Oct 2017 14:51:13 +0000