What you Need to Know About Roofing Scaffolding

What you Need to Know About Roofing Scaffolding

How to Set Scaffolding for a Roofing Project

It is much easier to work from scaffolding because it is stable, it has a wide work platform and it also provides a wide reach. Using roof scaffolding will save your time because you don’t have to constantly move a ladder. Before starting your work it is important to know about, how to set roof scaffolding. See ARS Restorations for more information on proper scaffolding practices.

Step 1. Rent Scaffolding: If you want to work on the roof then consider renting scaffolding because it can provide a large and stable work platform, where you can put materials and set up the tools.

Step 2. Assemble the Base and Frame: For a solid foundation, put the base plates or casters on the top of lengths of 2 x 10 lumber to stop them from sinking. Adjust the screws properly to level the scaffolding.

Step 3. Add Guardrails and Planks: Use only special scaffold planks to provide cover from side to side. Then install the rails and guardrail posts, nail or screw the corners together and attach them to the base.

Step 4. Scaffolding Tips and Accessories: The Casters will allow the scaffolding to move easily but before that take a few precautions:

  • First diagonally install a horizontal brace between the outside frames to keep them square.
  • Avoid moving scaffolding with materials, passengers and tools on the plank.
  • Before climbing the scaffolding, lock the casters.
  • Avoid overhead electric wires.

Different Types of Scaffolding


  1. Birdcage: The birdcage scaffolding is normally use for one level only. This scaffolding is easy to assemble and it can stand on its own which makes its perfect for smaller projects.
  2. Supported: This is the most common type of scaffolding as it can be seen on many construction sites. It is supported by the building and it is normally built from the floor up. This is the most safest and convenient form of the
  3. Cantilever: This type of scaffolding is used to reach the top of the buildings and for tight corners. It is recommended to wear harness if you are working on this type of
  4. Single pole: It is a single pole scaffolding which is used for minor projects.
  5. Rolling Scaffolding: It is a light frame scaffolding
  6. with the wheels attached to the base, which allows it to roll from one side to another.
Site Admin